Why and how to maintain your tiller equipment?

Pourquoi et comment entretenir son matériel motoculteur ?

With the rise of the agriculture sector, many people are getting into this field. However, running a successful farming project requires the use of quality equipment. The tiller is one of the frequently used equipment. The latter must be regularly maintained, given its importance. Indeed, the maintenance of the tiller is essential to your safety and the longevity of the machine.

Some elements require constant maintenance, while others require seasonal maintenance.

Proper maintenance of the tiller housings and frame

For the maintenance of the casings, it is recommended to clean the inside and the outside after each passage of the machine. To properly clean the inside of the machine housings, be sure to stop the engine and disconnect power to the spark plug. Then you can tilt it back. Do not place it aside, it could damage the strawberries.

If it is an electric model, be sure to unplug the power cord. You should always wear gloves during the cleaning phase, as you are handling potentially dangerous tools. For effective tiller cleaning, use a wooden or plastic stick to safely remove clods. To finish and get a better result, the use of a pressure washer would be perfect.

A water-repellent lubricant is then recommended to prevent corrosion. It should be remembered that regular maintenance of motorized cultivators of certain brands is essential. This is the case, for example, of the Kawasaki brand FA210D tiller, which requires frequent maintenance. Otherwise, you will have to find Kawasaki parts as soon as possible.

A lire également

Tiller maintenance: taking care of the engine

It is advisable to start with the air filter of the thermal tiller. It is recommended to clean the air filter every 50 hours of use or every 3 months. Replacing an air filter helps reduce fuel consumption, and therefore polluting emissions. Then there is the maintenance of the spark plugs (thermal engines). So that the machine starts properly every time. A better quality spark plug is essential.

It is recommended to clean the candle every 100 hours of use or every 6 months. As for cleaning the spark plug, use a special metal brush to clean the electrodes from combustion residues. It is important to take note of the product reference so that you do not have any doubts when you need to proceed with a replacement.

Finally, clean the threads and the base of the candle with a cloth. For engine oil maintenance, refer to your equipment manual for oil type and change frequency. To check the oil level, the plug should be unscrewed and cleaned.

Then put the cover back on without screwing it on. For cars, the height must be between the minimum and maximum heights. This should be done on a flat, cold surface. Regarding transmission fluid, you should consult the recommendations of the machine manufacturer.

To drain, disconnect the spark plug wire, remove the drain plug and place the drain pan under the crankcase. Once the used oil has been completely drained, the tiller must be leveled and the plug replaced.

How to go about maintaining the wheels?

After each use of the machine, it is recommended to clean the wheels of the tiller. To do this, use a high-pressure cleaner that helps remove clods of soil. Next, apply a waterproof lubricant to prevent corrosion. It is also important to have tire pressure between 0.5 and 1 bar.

What about the maintenance of belts and transmissions?

For the maintenance of belts and transmissions, it is necessary to proceed to the replacement when you think it is opportune. The only way to check the condition of the belt and transmission is to visually inspect these accessories.

In conclusion

Working in peace requires the use of quality equipment. To make your tiller last, it should be cleaned regularly.